 | New CAN BUS Service and Airbag Reset
The service interval resetter New CAN BUS Service and Airbag Reset is used exclusively to reprogram the service intervals for the following vehicles:
1. Service interval
2. Place of installation onboard diagnosis socket
3. Resetting the service interval display
4. Airbag
5. Error message | $0.00
 |
 | SI Reset 10in1
The Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light,
service warning light, service mileage, service intervals and airbag warning light on European made verhicles. | $0.00
|
 | SI Reset MB
Service Intervall Reset for Mercedes Benz cars with 38 pin connector except ML class
Resets the Service Indicator (Service Intervall)
Delete airbag faults (if your airbag warning light is on you can turn it off with this tool, if
the error is not a permanent one) | $0.00
|
 | SI Reset BMW OLD
Plug the Device into the 20 pin diagnostic socket of the car located in the engine compartment
Turn ignition key to enable the board electronic but don`t turn on the motor
Press the button for the operation you want to perform and keep it pressed
The LED of the choosen operation will be on
Keep the button pressed
Reset is done when the LED is turning off itself
Release button
On some dashboards there is needed to make a inspection reset before a oil reset | $0.00
|
 | SI Reset BMW OBD2
Plug the Device into the OBD2 socket of the car
All LED`s will blink and than stay on
Turn ignition key to enable the board electronic but don`t turn on the motor
Press the button for the operation you want to perform shortly
The LED of the choosen operation will light and the other Led`s will be off
LED`s will perform a light chain which means reset is done
On some dashboards there is needed to make a inspection reset before a oil reset | $0.00
|
 | SI Reset VAG OBD2
Plug the Device into the OBD2 socket of the car
All LED`s will blink and than stay on
Turn ignition key to enable the board electronic but don`t turn on the motor
Press the button for the operation you want to perform shortly
The LED of the choosen operation will light and the other Led`s will be off
LED`s will perform a light chain which means reset is done | $0.00
|
 | SI Opel Reset OBD2
Plug the Device into the OBD2 socket of the car
, All LED`s will blink and than stay on
, Turn ignition key to enable the board electronic but don`t turn on the motor
, Press the button for the operation you want to perform shortly
, The LED of the choosen operation will light and the other Led`s will be off
, LED`s will perform a light chain which means reset is done | $0.00
|
 | Opel service light reset
Use this tool to RESET the INSPECTION & OIL SERVICE reminders on your Reset Inspection Intervall for Opel
15.000 km or 1 year
15.000 km or 2 years
30.000 km or 2 years (LONG LIFE) | $0.00
|
Call: +86.131-4870-0055
