 | BMW Service light reset OLD
BMW build 1982-2001 with 20 pin diagnostic socket located in the engine compartment, Reset Inspection and Oil Service | $0.00
 |
 | BMW Service light reset via OBD
Plug the Device into the OBD2 socket of the car ,
,All LED`s will blink and than stay on
,Turn ignition key to enable the board electronic but don`t turn on the motor
,Press the button for the operation you want to perform shortly
, The LED of the choosen operation will light and the other Led`s will be off
,LED`s will perform a light chain which means reset is done
, On some dashboards there is needed to make a inspection reset before a oil reset | $0.00
|
 | MB service light reset
Service Intervall Reset for Mercedes Benz cars with 38 pin connector except ML class , Resets the Service Indicator (Service Intervall), Delete airbag faults (if your airbag warning light is on you can turn it off with this tool, if the error is not a permanent one) | $0.00
|
 | New CAN BUS Service and Airbag Reset
The service interval resetter New CAN BUS Service and Airbag Reset is used exclusively to reprogram the service intervals for the following vehicles:
1. Service interval
2. Place of installation onboard diagnosis socket
3. Resetting the service interval display
4. Airbag
5. Error message | $0.00
|
 | Opel service light reset
Use this tool to RESET the ’INSPECTION’ & ’OIL SERVICE’ reminders on your Reset Inspection Intervall for Opel
15.000 km or 1 year
15.000 km or 2 years
30.000 km or 2 years (LONG LIFE) | $0.00
|
 | SI Opel Reset OBD2
Plug the Device into the OBD2 socket of the car
, All LED`s will blink and than stay on
, Turn ignition key to enable the board electronic but don`t turn on the motor
, Press the button for the operation you want to perform shortly
, The LED of the choosen operation will light and the other Led`s will be off
, LED`s will perform a light chain which means reset is done | $0.00
|
 | SI Reset 10in1
The Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light,
service warning light, service mileage, service intervals and airbag warning light on European made verhicles. | $0.00
|
 | SI Reset BMW OBD2
Plug the Device into the OBD2 socket of the car
• All LED`s will blink and than stay on
• Turn ignition key to enable the board electronic but don`t turn on the motor
• Press the button for the operation you want to perform shortly
• The LED of the choosen operation will light and the other Led`s will be off
• LED`s will perform a light chain which means reset is done
• On some dashboards there is needed to make a inspection reset before a oil reset | $0.00
|
